SuperOBD2 Chip tuning is similar to car ECU remapping but the change to ecu mapping is not permanent and will return to original settings when the tuning device is removed to the OBD2 port.II. How does it work?
When it plugged into OBD2 connector, SuperOBD2 receives the information from the car computer ECU. With the received data from ECU, SuperOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car and make it fuel efficient.
This does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
SuperOBD2 finds out the hidden power of your car. SuperOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.
SuperOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug SuperOBD2 from OBD2 connector.III. Is it safe method of car tuning?
SuperOBD2 is equipped with the engine protection function and 100% safe for your car engine.
SuperOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting. SuperOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug SuperOBD2 from OBD2 connector.
SuperOBD2 does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
We are personally using this to our cars for several years already and as well as to our valued customers and we never encountered problems.IV. Does it affect the warranty of the car?
This will not affect the warranty of your car because when you unplug the SuperOBD2, it will turn back to the car's original settings. Your car warranty provider will not notice any changes to the settings.V. What are the benefits?
This product will make your car more responsive and aggressive specially in cases of shifting gears. This will eliminate the delay or lag in the car’s transmission for both manual and automatic cars therefore will guarantee you best driving experience.
This will also result to fuel savings because it removes Throttle delays to your car and since less amount of pedaling to the accelerator is required to achieve the desired speed therefore less fuel consumption.VI. Which car models can use this product?
Car with computer box and OBD2 port. Any brand both automatic and manual transmission.
Hindi po pwede sa mga sasakyan na to kasi hindi po sila OBD2 compliant. Multiplex OBD po port nila and not compatible sa tuning device:
👉 Fortuner model 2009 to 2012
👉 Hilux year 2012 and below
These car models naman po are hindi pa OBD2 compliant kaya hindi din po pwede sa tuning device:
👉 Toyota Revo (Tamaraw)
👉 Isuzu sportivoVII. How about the quality of the product?
Our product is 100% Genuine and has the best quality in the market. It is a double PCB, high quality version. Proven and tested by our usage of the product and our clients who are very satisfied of the product.
VIII. Do I need to unplug it when not using the car?
You don’t need to unplug it when not running the car. Leaving the device plugged-in inside the car when the car engine is turned-off will not affect the device and as well as the car. If you will not use your car for more than 4 days, we suggest to remove the device from your car and install again when the car will be use to save power to your battery.
Note: Make sure to follow installation steps when installing the device again.IX. Is the device lighting up even the car engine is off?
The car tuning device will light up even the engine is off but don't worry because this consumes very small amount of power and will not affect your car battery. The device is using very small LED light and require very small power.
Turn-off the engine first then remove the device.
Note: Make sure to follow installation steps when installing the device again.XI. What to do during car battery change, battery jumper or removing one terminal of the battery?
Remove the tuning device before changing the car battery or when doing car battery jumper or when you remove one terminal of the battery to make sure not to harm the tuning device during these processes.
After the battery installation/re-installation is done and the car is all ok, reinstall the tuning device following the installation guide.XII. What to do during scheduled car maintenance?
If there is a need to perform scanning of car ECU as part of the maintenance activities then we suggest to remove the tuning device because the maintenance provider will use the OBD2 port.XIII. Troubleshooting tips
- If you think the device is not effective, please reinstall it following the installation guide properly.
- If the tuning device LEDs is not lighting up after installation, please reinstall it following the installation guide properly.
- If the tuning device is not blinking in approximately every 30 seconds interval after installation, please reinstall the tuning device following the installation guide properly.
Note: If not working after reinstallation, message us using our contact info.XIV. Do you have warranty for this product?
Yes, we do have 1 year warranty. Just message me in our Facebook official page or you can message us in our provided contact number or send us message via email that you are claiming the warranty then we will send you a new product. For the warranty claim to be valid, the device damage should not be intentionally done to the product however due to natural circumstances while using the product. Please visit our warranty section on this page for more details.XV. How many years is the lifespan of the device?
The device can last up to 5 to 7 years.XVI. How to install the device?
It is very quick and easy. Please follow these steps:
- Turn-off the engine of the car.
- Find OBD2 connector(*) in your car and Plug in SuperOBD2 Chip Tuning Box
- Insert the key into the ignition and twist the key to the first stage ( first stage is first click/first twist for car with key and for push button car, press the start button once without stepping into the break). (Do not start the car yet)
- Press the reset button for about 5 sec (green circle button in the superOBD2) . After releasing the button, just wait for a while about 30-54 sec. (SuperOBD2 Chip Tuning Box will communicate and establish connection with ECU)
- Start up the engine (Installation completed).
Usually it can be found underneath the dashboard, in the area under the steering column.
If you cannot find it, please check these three links:
and use the search engine to find the location of OBD2 port of you car model. Just fill in the car manufacturer, ex. Honda, Toyota and then fill in the car model, example CR-V (1996 – 2001) model.
(Note: Testimonials below are from Automotive Diagnostics store. This store and Automotive Diagnostics store have the same owner.)